Thursday, 19 September 2013

"Put some muscle into it!"

Zipping up my overalls, I realised I forgot the packet of Gingernuts that Katie keeps telling me to take to SIT.  (P.S It's for our smoko). Ready to get the day underway I can see all of the materials on the work bench. Walking around the bench I take a good look at what the model looks like. Looking down on the bench, a whiteboard appears that Andy brought over. The first step for today was measuring out the bull and making sure the size is going to be as good as it can be.  After that, we realised that we needed a beam to support the head so that the neck can stick onto the head and it will be more stable. The way that we were going to make this happen was to weld a steel beam into rounded circles.  There were two different circles, one was going to fit inside the neck, the other into the head.  We finally accomplished that, and headed onto making the neck.  This had to have a certain measurement or else it would not fit onto the body. The way that this was going to be rounded, it was by a hand roller. With Andy pushing the tin, I had to put some muscle into rolling the hand roller.  Getting rounded, the tin had to had a few touch ups. With all the materials that we have all made so far, it is coming into place. Finishing off the day at SIT, I washed my hands and felt a tap on my shoulder.  It was Andy with a two dollar coin that he found, and handed over to me.  This will go straight to the i-Pod fund.

Your Blogger out,
Thomas

PS - This time, I'm out of my overalls because I'm back at Enrich for the rest of the day.-




Thursday, 12 September 2013

A smoko forgotten!

This blog post is always going to be updated... on my thing doing engineering, but not all the time. As I hopped out of the door, opening the construction door there were a herd of human beings! Covered in bright florescent overalls but, I manage to make my way through. I started to chuck my overalls on while Andy was out getting a lesson on go-karts. Andy had bought a small knob, that will be welded on to my drain for a filter to take away the ice when it melts. Walking over to the machinery department, We come across Dave who was working there at the right possible time. The machine we were going to use this time was... um.. ah... ooh. I can't remember anyway. But it's job was cutting the stainless steel with a hole in the middle. It took some time but like everyone says 'practice makes perfect!' This was my only time using this machine. When it got inside the steel it got a lot harder than usual. As the construction started and finished Andy said to Dave "This big boy thinks he knows everything!" 
Bringing out the reflection shield, Andy prepares the welder. Sparks fly up in the air, but don't worry, I do have my visor on! Slowly attaching the BOTTOM Andy only gets it attached before I had to go back here to Enrich.
P.S I am still in my overalls!!
Keep tuning in,
Thomas

Thursday, 5 September 2013

A mistake - costly...

Friday's back in and rolling! Instead of Stu coming in this morning Andy came in and sorted me out, Stu's on a secret course, I shouldn't be telling anyone, anyway it's not a secret! The first thing we got to work with was the chilly bin for me old man Dad!! The next step was to make that front and back for the chilly bin. To cut the stainless steel I was using a massive machine that cut steel.The measurements were 303cm so that was hopefully the height. The next machine was called a tack welder which make a small tack and it melted the two materials together. But we were on little millimeter over!!! Andy said that's fine! We were finished as soon as possible and Andy gave me an idea of making the rear end have a semi- circle to make it come out. The second machine I used curled steel. The way it worked was that it shaped the material and to make it whatever you wanted. It started bouncing up and down and I jumped like a wallaby! By then it was time to go home. I took my overalls off and and carried on with my blogging.

Your blogger,
Thomas out   

Thursday, 15 August 2013

Diary of a bull kid

"One, two, three, four five, six and seven drums in total!" I told Stu. He and myself went on a rampage for different oil drums around the carpentry area. There were seven different oil drums, and there were four colours, blue for the body, yellow for the legs, green for the neck, yellow and green for the head with reinforcing steel for the tail. Obviously every thing was going great until measurements just fell apart on the both of us. We had everything done until the body of the bull as too long! So Stu showed me how to cut the object. The measurement was meant to be 420mm long but it came up as 600mm long. The gas made a sound out of the tube then suddenly out of the speed of light comes a sound so loud, so terrifying it made my heart jump.
As I wrap one hand over the other, I hold onto the machine, sparks blew everywhere, my eyes jump, steady, steady... Doh! Joking. I did it, I cut through the metal into the inside, Wow! That was it for this afternoon, but still, come on I learnt new tools and new way to construct!
Your blogger out,
Thomas.

Thursday, 8 August 2013

A couple of souvenirs

A dropped mouth surrounded my face, as I was engrossed in a tough game of chess against Katie. Darryn turned around and called my name "Thomas," I spun round and noticed two wise men. They were Stu and Warren. We all left Enrich and headed towards SIT. When Stu and I entered his office, we sat down and discussed my passion project. A picture came up on the screen of Stu's computer, which was a tin bull. He showed me the types of ways to weld, pot rivet, how to sheet metal craft and how to break off metal/tin. 
A big suit of overalls covered my body and a mask with goggles went over my head.
As we went to the station, there were all different gases like carbon dioxide, oxygen and many more! "3, 2, 1 alright go!" shouted Stu. As I press down on the lever it shot sparks everywhere across the room. "Stop" shouted Stu again. I let go of the lever and set the handle free. There were my two souvenirs. One of them were a cylinder and the other was two flat pieces of metal welded together. Stu drove me back to Enrich. As I left his truck, I thanked him and came in here to do this: blogging

Your blogger,
Thomas           

Thursday, 1 August 2013

Recovery

A Race to save sugar babies rescued by Kyle, Alex and I "How about we plait over one another and create a raft?" I suggest. In the last remaining second "50!" Those babies are counting on us! Well not really babies..... they are sacks full of sugar endangered! Kyle and I sprint to the cellotape: "17." The final moment in Enrich. "2....1..."
Once we built our stretcher that looked like a big ball of garbage, Katie moved us onto the starting line.  Secondly, there were two people carrying the raft a.k.a Kyle and I. We picked up the sugar babies and weaved through the rocks a.k.a. cones and up the mountain (chairs) and down. We stopped and finished! We were the only ones that had crossed the line. Now for the moment of truth. The winners are team stretcher!
It was a good victory but we still haven't claimed our prize Katie!
I've learnt that working in a different team can help you and other people.
Thomas, out

Thursday, 11 July 2013

Computer cataloging

I'm back in action again! 
Wow what a day!
I had spent so much time on my passion project that I didn't really get to eat. Anyway I was e-mailing Stu from SIT and he gave me a few questions which added up to a total of ten answers that I had to solve. There was so much writing involved in it that it almost was a story! Right now he's just got back to me that I might change the date when were going to meet. I've got my homework done and dusted with and now I will probably get materials for my project to catch up with it. I'm ready to start  welding together, the bull not me! What I need is a 20 gallon drum tin and well really thats mostly it. I will be going to SIT on week one or week two of term three. My fingers are thumb from typing all day.
Let's get started!!